Self Clean Operation; Display Button - IVT 12 THR-N Operation Manual

SELF CLEAN OPERATION

SELF CLEAN operation will reduce the growth of mold
fungus with Plasmacluster ions and dry inside of the
unit. Utilize the operation at seasonal change over
terms.
Press the SELF CLEAN button when the
1
unit is not operating.
• The remote control will display "
(The " " will disappear automatically in 1 min-
ute.)
• The light blue SELF CLEAN lamp (
will light up.
• The unit will stop operation after 90 minutes.
TO CANCEL
Press the STOP button.
• The light blue SELF CLEAN lamp (
10
50°F
NOTE:
• You cannot set the temperature, fan speed, air fl ow
direction or timer setting during the SELF CLEAN op-
eration.
• Mold fungus already grown can not be eliminated by
this operation.
• SELF CLEAN and PLASMACLUSTER use common
lamp, only lamp color different.

DISPLAY BUTTON

Press the DISPLAY button when the lamps on the unit
are too bright. (All the lamps on indoor unit cannot be
turned off.)
1 During operation, press the DISPLAY
button.
• All the lamps on indoor unit will get dark in same time
".
TO LIGHT UP
Press the DISPLAY button again.
)on the unit
) will turn off.
1
GB-12
10
50°F
1