Timer Operation - IVT 12 THR-N Operation Manual

TIMER OPERATION

When the 1 . 2 . 3 . 5h OFF TIMER is set, the unit will
automatically turn off after the setting hours.
1 . 2 . 3 . 5h OFF TIMER
Press the 1 . 2 . 3 . 5h OFF TIMER button to set
1
the desired time.
• The orange TIMER lamp (
• The remaining time will be indicated on the re-
mote control in 1-hour increments.
TO CANCEL
Press the SET/C button.
1
Press the 1 . 2 . 3 . 5h OFF TIMER button.
2
Press the STOP button.
3
• The orange TIMER lamp (
turn off.
• The current clock time will be displayed on the
remote control.
3
10
50F
1
2
NOTE:
• The 1 . 2 . 3 . 5h OFF TIMER has priority over TIMER ON
and TIMER OFF.
• If the 1 . 2 . 3 . 5h OFF TIMER is set while the unit is not
operating, the unit will operate at the formerly set
condition and stop after a period of set time.
Before setting the timer,make sure the clock is
properly set with the current time.
TIMER OFF
1
2
CANCEL
) will light up.
3
) on the unit will
1
TIPS ABOUT TIMER OFF OPERATION
When the TIMER OFF mode is set, the temperature
setting is automatically adjusted to prevent the room
from be coming excessively warm or cool, for example
while you sleep. (Auto Sleep function)
COOL/DRY MODE:
• One hour after the time operation begins, the
HEAT MODE:
• One hour after the timer operation begins, the
GB-10
Press the TIMER OFF (
The TIMER OFF indicator will blink;
p r e s s t h e T I M E A D VA N C E (
REVERSE ( ) button to set the desired
time.
(The time can be set in 10-minute increments or
decrements.)
Press the TIMER SET (SET/C) button.
• The orange TIMER lamp (
light.
10
50°F
temperature setting rises 1°C higher than the original
temperature setting.
temperature setting drops 3°C lower than the original
temperature setting.
) button.
) o r
) on the unit will
3
2
1