Level 1 and 2 Service Manual
Removing and Replacing the Keypad Mylar
G
6809506A96-O
It is mandatory that the following special tools must be used when
following this procedure:
Z6 EL Alignment- and Press Tool - part number 0-00-00-40852
Generic Press Fixture - part number 19501980 Available at the AMS Online-shop
62.214.1.200 (for access please contact your local Motorola contact)
The Z6 EL alignment and press tool must be used for this replacement procedure.
Figure 28. Z6 EL Alignment and Press Tool
March 13, 2007
Disassembly
070270o
39