Removing And Replacing The Keypad - Motorola V180 Service Manual

Disassembly

Removing and Replacing the Keypad

28
1. Remove battery cover, battery, SIM, antenna, rear housing, and transceiver
board assembly as described in the procedures.
2. Using the plastic tweezers, lift the top part of the keypad assembly, away from
the transceiver board assembly (see Figure 9). The bottom part the keypad
assembly may be secured by adhesive material. Remove the remainder of the
keypad assembly from the transceiver board with caution.
Figure 9. Removing the Keypad
3. To replace, remove any protective covering to expose the keypad adhesive.
4. Carefully set the keypad assembly into the front housing assembly. Ensure the
volume/smart key keypads will contact the switchdome assembly on the
transceiver board when installed.
5. Insert the keypad into the front housing, ensuring the keys align properly with
the openings in the front housing.
6. Replace the transceiver board assembly, display flex connector, rear housing
assembly, antenna, SIM, battery, and battery cover as described in the
procedures.
July 08, 2004
V180
040437o
6809485A79-O