Table of Contents
Advertisement
Disassembly
30
6.
To replace, place the camera assembly into the housing. Ensure the external
side key switchdomes on both sides of the phone are correctly inserted behind
the keys.
7.
Insert the transceiver board assembly into the front housing with the display
flex and the camera assembly flex connector on top of the transceiver PC board
assembly.
➧
Be sure the volume/smart buttons and voice button are correctly positioned in
relation to the corresponding switches on the transceiver board. Verify operation of
the buttons after replacing the transceiver board and rear chassis assembly.
8.
Insert the camera flex and display flex connectors squarely into their mating
connectors on the transceiver board and press gently but firmly until they snap
into place.
9.
Replace the daughterboard assembly, rear housing, antenna, SIM, battery, and
battery cover as described in the procedures.
March 13, 2007
Z6
6809506A96-O
Advertisement
Table of Contents
Troubleshooting
