Removing And Replacing The Keypad - Motorola MOTORIZR Z6 Service Manual

Level 1 and 2 Service Manual

Removing and Replacing the Keypad

6809506A96-O
1. Remove battery cover, battery, SIM, antenna, rear housing, daughter board
assembly, and transceiver board assembly as described in the procedures.
2. Using the plastic tweezers, lift the keypad assembly, away from the front
housing assembly (see Figure 20).
Figure 20. Removing the Keypad
3. To replace, carefully set the keypad assembly into the front housing assembly.
Ensure the volume/smart key keypads will contact the switchdome assembly
on the transceiver board when installed.
4. Insert the keypad into the front housing, use the guide pins molded into the
front housing to ensure the keypad is placed correctly in the front housing.
5. Replace the transceiver board assembly, daughter board assembly, rear
housing assembly, antenna, SIM, battery, and battery cover as described in
the procedures.
March 13, 2007
Disassembly
061701o
31