Led Indicators - Zte Telstra MF90 User Manual

POWER UP YOUR 4G WI-FI HOTSPOT
Press and hold the Power key for 3 seconds until the LED's light up.
The Wi-Fi hotspot will be available after about 20 seconds.
Check the condition of your Wi-Fi hotspot shown by the LED indicators.
To switch your device Off, press and hold the power key for 5 seconds until the
LED's switch off.

LED INDICATORS

Battery indicator
No LED
Red solid
Red flashing
Green solid
Green
flashing
Data indicator
Red
Yellow solid
Yellow flashing
Green solid
Green flashing
Network indicator
Red
Green solid
Green blinking
Battery Status
Device is off or asleep. Press the power key to wake the
device up, or hold the power key for 3 seconds to
power On.
Battery is discharged, less than 12% charged. Please
connect your charger.
Battery is less than 12% charged and is charging.
Battery is more than 23% charged.
Battery is more than 23% charged and is charging.
Data Status
Data allowance is expired. Please recharge.
Data allowance is low, <100MB. Please recharge.
Pre-paid data is not activated yet. Follow the links
in the web UI to activate your data service.
Data allowance is healthy and activated.
A software update is available.
Hotspot Status
Offline. Not registered on the network. Check your
SIM card status in the web interface*
Registered on the 3G network
Active data transfer on the 3G network
Page 7 of 38