Led Behavior - Zte MC7010CA Quick Start Manual

LED Behavior

When setting up the MC7010CA, the LED will have the following behavior.
Indicator
POWER
NETWORK Red blinking
Green blinking
LAN
Green blinking
SIGNAL
(Three
lights)
NOTES:
•
To avoid light pollution and save energy, indicators will be turned off after the device operates
normally for about 15 minutes. If indicators need to be solid on, you can change it's settings on
the MC7010CA configuration page.
•
When a problem occurs, indicators will be automatically lighted up again to help you check the
device status. After the problem is resolved, indicators will be turned off immediately.
Status
Power is on and external power supply is working
On
normally.
Off Power is off.
The device is in error status:
•
•
•
Green on The device isregistered or connected to the 5G
networkand data is being transferred.
The device isconnected or connected to the 3G/4G
LTE network and data is being transferred.
Green on The LAN port is connected.
Data is being transferred.
Off The LAN port is not connected.
On Three lights show the signal strength. More lightson
means better signals.
Off There is no signal or no nano-SIM card is inserted.
Description
The device isnot registered to the mobile network.
There is no nano-SIM card inserted.
There is no network service available.
20