Zte Telstra MF90 User Manual page 35

Problem
How do I reset to
factory defaults?
How do I check
the SMS service
centre number?
How do I select
Network mode?
How do I
manually select a
carrier?
How do I enable
USB tethering?
How do I
configure APN's
How do I check
for Software
Updates?
How do I get
more technical
support?
Possible Causes
Page 35 of 38
Suggested Solution
From the web interface select Settings >
Device Settings > Reset or...
Open the back cover and locate the Reset
button. Depress gently using a pen or
paperclip, and hold for 10 seconds until
the LED's flash.
Log onto the web interface and check
SMS > SMS Settings
Log onto the web interface. Go to
Settings > Network Settings > Network
Selection > Select the drop down box
called Automatic and choose LTE only or
3G only. (You need to press Disconnect
first).
Log onto the web interface. Go to
Settings > Network Settings > Network
Selection > Manual (You need to press
Disconnect first). Press Search
Connect the device to your computer,
then follow the on screen steps using
the CDROM to
connection. You may need to uninstall
previous device installations first if
applicable.
Log onto the web interface. Go to
Settings > Network Settings > APN. See
the example in the above guide for mre
details.
From the web interface select Settings >
Device Settings > Software Update
Visit ztemobiles.com.au
475 during office house AEST.
install the USB
or call 1300 789
L
w
in
a