Moving The Printer To Another Location; Shipping The Printer - Lexmark MS310 series User Manual

Maintaining the printer
•
If an optional tray is installed, then remove it from the printer. To remove the optional tray, slide the latch on
the right side of the tray toward the front of the tray until it clicks into place.
•
Use the handholds located on both sides of the printer to lift it.
•
Make sure your fingers are not under the printer when you set it down.
•
Before setting up the printer, make sure there is adequate clearance around it.
Use only the power cord provided with this product or the manufacturer's authorized replacement.
Warning—Potential Damage: Damage to the printer caused by improper moving is not covered by the
printer warranty.

Moving the printer to another location

The printer and its hardware options can be safely moved to another location by following these precautions:
•
Any cart used to move the printer must have a surface able to support the full footprint of the printer.
•
Any cart used to move the hardware options must have a surface able to support the dimensions of the
hardware options.
•
Keep the printer in an upright position.
•
Avoid severe jarring movements.

Shipping the printer

When shipping the printer, use the original packaging.
88