Table of Contents
Advertisement
Operation Guide 3210
Adjusting the Current Time Setting
Having Bluetooth connection turned on while adjusting the time will automatically
display the date and time synchronized with the connected device (mobile phone).
Adjusting the Time Setting with Bluetooth Connection Turned On
Perform the following procedure when the time shown in the watch's Timekeeping
Mode does not match the time shown with the connected device (mobile phone).
1.
In the Timekeeping Mode, hold down the watch's
button for at least fi ve seconds.
[SET hold] will initially appear on the watch's display to
indicate the Timekeeping Mode setting screen. Keep
A depressed until the watch changes to the time sync
screen shown below, which indicates that time syncing
has started.
To exit the time sync screen and return to the timekeeping screen at any time,
press any button.
After time syncing is complete, the watch will return to the timekeeping screen.
E-20
Note
Even if the watch and mobile phone are paired, confi gure the watch's time zone area
and summer time settings manually if your mobile phone does not support Local Time
Information.
1.
In the Timekeeping Mode, hold down
seconds until the time zone area setting screen appears.
[SET hold] will appear on the watch display, following
by the time zone area setting screen.
B (+) and D (–) to scroll through offsets until the
2.
Use
time zone that corresponds to the area where you will be
using the watch is displayed.
Holding down either button scrolls at high speed.
Note
For information about the UTC offsets for different areas, see the "City Code Table"
(page E-74).
E-22
C to navigate to the 12/24-hour Timekeeping
5.
Use
setting screen.
D to toggle between [12H] (12-hour timekeeping)
6.
Press
and [24H] (24-hour timekeeping).
When [12H] (12-hour timekeeping) is selected, a [P]
(p.m.) indicator will appear on the display for times
from noon until 11:59 p.m.
C to navigate to the Seconds Reset screen.
7.
Use
D to reset the seconds to [00].
8.
Press
E-24
C to navigate to the Month setting screen.
13.
Use
B (+) and D (–) to change the month setting.
14.
Use
Holding down either button scrolls the setting at high
speed.
C to navigate to the Day setting screen, and then
15.
Use
use B (+) and D (–) to change the setting.
Note
The watch's Full Auto Calendar automatically makes adjustments in the day setting to
account for different length months and leap year.
16.
After all the settings are the way you want, press
Mode.
Pressing C switches to the Operation Tone On/Off screen.
E-26
Holding down either button scrolls at high speed.
To display the UTC city code (UTC differential 0), press B and D at the same
time.
To restart scrolling city code name scrolling from the beginning of the currently
selected name, press the A button.
3.
To return to the Timekeeping Mode, press
Note
The watch will not be able to display World Time information correctly if the mobile
phone you are using does not support Local Time Information. In this case, use the
procedure under "Adjusting the Time Setting with Bluetooth Connection Turned Off"
(page E-21) to confi gure Home Time zone and summer time settings manually.
Confi guring the Summer Time (DST) Setting
A for about two seconds.
1.
In the World Time Mode, hold down
[DST hold] will appear on the display. After that, the summer time setting will
toggle to either on or off.
[DST] next to the time indicates that summer time is turned on.
E-28
A
A for about two
A to return to the Timekeeping
C fi ve times.
Note
The start of any communication operation will cause time sync to pause. It will resume
after the communication operation is complete.
Adjusting the Time Setting with Bluetooth Connection Turned Off
When the time setting cannot be synced using Bluetooth for some reason, you can
use the procedure in this section to adjust it manually.
After you display the time zone setting screen, you can use the watch's C button to
cycle through the different settings in the sequence shown below.
12/24-hour
Time Zone
Summer Time
Timekeeping
Power Saving
Display Illumination
Operation Tone
Duration
On/Off
C to navigate to the Summer Time screen.
3.
Use
D to toggle the summer time setting between
4.
Press
ON and OFF.
The [DST] indicator is displayed while summer time
is turned on.
Note
Summer time, or Daylight Saving Time (DST) as it is known in some countries, calls
for setting clocks ahead one hour from standard time during the summer season.
Note that the period during which and the areas where summertime is applied
depend on each country. Some countries or geographic areas may not use summer
time.
The summer time setting cannot be changed for the UTC World Time zone.
The summer time setting is applied to the currently selected time zone only. A
setting confi gured for one time zone does not affect any other time zone.
C to navigate to the Hour setting screen.
9.
Use
B (+) and D (–) to change the hour setting.
10.
Use
Holding down either button scrolls the setting at high
speed.
Use C to navigate to the Minute setting screen, and
then use B (+) and D (–) to change the setting.
C to navigate to the Year setting screen.
11.
Use
B (+) and D (–) to change the year setting.
12.
Use
Holding down either button scrolls the setting at high
speed.
World Time
World Time lets you display the current time in any one of 100 cities (35 time zones)
around the world. The city that is currently selected in the World Time mode is called
the "World Time City".
Viewing the Times in Other Time Zones
1.
In the Timekeeping Mode, press
Time Mode.
[WT100] will appear on the display for about one
second, and then the screen for the currently
selected World Time City will appear.
B (+) and D (–) to scroll through the World
2.
Use
Time Mode city codes.
Scrolling to a city code displays the current time in
that city.
Note
Summer time, or Daylight Saving Time (DST) as it is known in some countries, calls
for setting clocks ahead one hour from standard time during the summer season.
Note that the period during which and the areas where summertime is applied
depend on each country. Some countries or geographic areas may not use summer
time.
The summer time setting cannot be changed for the UTC World Time zone.
The summer time setting is applied to the currently selected time zone only. A
setting confi gured for one time zone does not affect any other time zone.
Seconds
Hour
Reset
Minute
Day
Month
Year
E-21
E-23
E-25
C to enter the World
E-27
E-29
Advertisement
Table of Contents
