Time Adjustment; Adjusting The Current Time Setting - Casio 3536 Operation Manual

Time Adjustment

Use the procedures in this section to adjust the
date and time settings.
Adjusting the Current Time
Setting
Use the procedures in this section to adjust the
date and time settings.
Setting the Time/Date
●
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least one second.
Release the button when the seconds
start to flash.
Seconds
Watch Operation Guide 3536
3.
Use (C) to display the setting you want to
change.
Each press of (C) cycles through
●
settings in the sequence shown below.
4.
Configure the date and time settings.
While the seconds are flashing,
●
pressing (D) will reset them to 00. 1 is
added to the minutes when the current
seconds count is between 30 and 59
seconds.
For all the other settings, use (B) and (D)
●
to change the flashing setting.
Holding down (B) or (D) scrolls through
settings at high speed.
5.
Repeat steps 3 and 4 to select time and
date settings.
6.
Press (A) to complete the setting
operation.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Seconds
Home City
Summer time
Hours
Minutes
12/24-hour timekeeping
Year
Month
Day
Configuring the Summer Time Setting
●
If you are in an area that observes summer
time, you can also configure a summer time
setting.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least one second.
Release the button when the seconds
start to flash.
Seconds
3.
Press (C) twice.
4.
Use (D) to change the summer time
setting.
[OF]
●
The watch always indicates standard
time.
[On]
●
The watch always indicates summer
time.
5.
Press (A) to complete the setting
operation.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
7