Casio QW-3126 Operation Manual

MA0904-EA
Thank you for purchasing this CASIO watch. To ensure that it can provide
you with the years of service for which it is designed, be sure to read
this manual carefully and follow the instructions contained herein. Pay
particular attention to the precautions at the end of this manual text.
•
Your watch may differ somewhat from the one shown in the illustration.
Illumination
Important!
•
Illumination may be difficult to see under bright sunlight.
•
If you press any button besides
operation starts while the face is illuminated, illumination will turn off.
•
You may notice a slight sound from the watch while illumination is turned
on. This is caused by vibration of the EL panel used for illumination and
does not indicate malfunction.
To specify the illumination duration
Operation Tone
You can turn the tone that sounds to signal a mode change or other
operation on or off.
To turn the operation tone on or off
• Note that holding down
change the watch's mode setting. After completing the operation, use
C to select the mode you want.
Display
The display style of your watch (dark figures on a light background or
light figures on a dark background) will depend on its model number. All
of the illustrations in this manual show dark figures on a light background.
Depending on your watch model, the dark areas (current time, function on
indicator, other indicators) shown in the display illustrations of this manual
may appear as light areas or different color areas.
• Note that the display style of a watch is fixed. You cannot switch
between styles.
Operation Guide 3126
Pressing B in any mode except while a
setting screen (one with a flashing setting)
is on the display will turn on illumination.
•
Illumination provides easy reading in
the dark.
B , or if an alarm or other beeper
1. In the Timekeeping Mode, hold down
A for about one second until the
seconds digits start to flash. This is the
setting screen.
•
The watch will exit the setting screen
automatically if you do not perform
any operation for about two or three
minutes.
2. Press B to toggle the approximate
illumination duration between 1.5 and
three seconds.
: 1.5 seconds
: 3 seconds
3. After the setting is the way you want,
press A to exit the setting screen.
When any screen besides a setting screen
(one with a flashing setting) is on the
display, hold down C for about three
seconds.
• This will cause the operation tone to
sound and then toggle its operation
on or off.
•
A MUTE indicator is on the display while
the operation tone is off.
•
The alarm, hourly time signal, and
countdown timer time up beeper
continue to sound, even when the
operation tone is turned off.
C to perform the above operation also will
Modes and Indicators
Each press of C cycles through modes in the sequence shown below.
•
If you do not perform any operation for about two or three minutes
while in the Alarm Mode, the watch will revert automatically to normal
timekeeping.
To check the current Home City
Press A to display the city code of the currently selected Home City in
place of the day of the week for about one second.
Days of the Week
SU: Sunday, MO: Monday, TU: Tuesday, WE: Wednesday, TH: Thursday,
FR: Friday, SA: Saturday
World Time
Use C to enter the World Time Mode as shown under "Modes and
Indicators".
World Time lets you display the current time in any one of 48 cities (29
time zones) around the world.
• When you enter the World Time Mode, the screen for the city that was
displayed when you last exited the mode appears first.
•
The seconds count in the World Time Mode is synchronized with the
Timekeeping Mode seconds count.
•
The same 12-hour/24-hour format you select for the Timekeeping Mode
time is also applied in the World Time Mode.
Important!
If the World Time Mode time is incorrect, check to make sure the correct
Home City is selected and that its current time is set correctly in the
Timekeeping Mode.
•
See "Modes and Indicators" for information about checking the time,
date and Home City setting, and "Configuring Time and Date Settings"
for information about adjusting settings.
To search for a city
In the World Time Mode, press D to scroll eastward through city codes.
•
Holding down D scrolls at high speed.
1