System; Language Settings - Panasonic KX-HDV130 Manual

Value Range
Default Value
Configuration File Reference
Wait Time for Control
Description
Value Range
Default Value
Configuration File Reference
Wait Time for Reflector
Description
Value Range
Default Value
Configuration File Reference

4.4 System

This section provides detailed descriptions about all the settings classified under the [System] tab.

4.4.1 Language Settings

This screen allows you to select the language used for the Web user interface. The language setting is only
applicable when you log in to the Web user interface as User.
Note
•
If you change the language while logged in to the Web user interface with the User account, the
language will be changed after the message "Complete" is displayed. If you are logged in with the
Administrator account, the language will be changed when a user logs in to the Web user interface as
User.
•
The language used for the Web user interface for the Administrator account is always English.
•
The language used for the unit remains unchanged even if the language for the Web user interface is
changed.
Document Version: 2017-07
1-65535
9000
TWAMP_TEST_PORT
Specifies the time, in seconds, for the TWAMP server to wait for
incoming packets for maintaining the session.
1-65535
900
TWAMP_SERVER_WAIT_TIME
Specifies the time, in seconds, for the TWAMP reflector to wait for
incoming packets for maintaining the session.
1-65535
900
TWAMP_REFLECTOR_WAIT_TIME
4.4 System
Administrator Guide 97