Nat Identity - Panasonic KX-HDV130 Manual

Value Range
Default Value
Configuration File Reference

4.5.1.2 NAT Identity

Enable Rport (RFC 3581)
Description
Value Range
Default Value
Configuration File Reference
Enable Port Punching for SIP
Description
Value Range
Default Value
Configuration File Reference
Enable Port Punching for RTP
Description
Value Range
Default Value
Configuration File Reference
Document Version: 2017-07
Max. 64 characters
Note
•
If "{mac}" is included in this field, it will be replaced with the
unit's MAC address in lower-case.
•
If "{MAC}" is included in this field, it will be replaced with the
unit's MAC address in upper-case.
•
If "{MODEL}" is included in this field, it will be replaced with the
unit's model name.
•
If "{fwver}" is included in this field, it will be replaced with the
firmware version of the unit.
•
If "{sipver}" is included in this parameter, it will be replaced with
the SIP software version of the unit.
Panasonic-{MODEL}/{fwver} ({mac})
SIP_USER_AGENT
Selects whether to add the 'rport' parameter to the top Via header
field value of requests generated.
•
Yes
•
No
No
SIP_ADD_RPORT
Specifies the interval, in seconds, between transmissions of the Keep
Alive packet in order to maintain the NAT binding information for SIP
packet.
0, 10–300
0: Disable
0
PORT_PUNCH_INTVL
Specifies the interval, in seconds, between transmissions of the Keep
Alive packet in order to maintain the NAT binding information for RTP
packet.
0, 10–300
0: Disable
0
RTP_PORT_PUNCH_INTVL
4.5.1 SIP Settings
Administrator Guide 115