Panasonic KX-HDV130 Manual page 277

Description
Value Range
Default Value
Web User Interface Reference
SIP_18X_RTX_INTVL_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
SIP_SUBS_EXPIRE_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
SUB_INTERVAL_RATE_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
SUB_RTX_INTVL_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Document Version: 2017-07
Specifies whether to add the option tag 100rel to the "Supported"
header of the INVITE message. For details, refer to RFC 3262.
•
Y: Enable 100rel function
•
N: Disable 100rel function
Note
•
If set to "Y", the Reliability of Provisional Responses function
will be enabled. The option tag 100rel will be added to the
"Supported" header of the INVITE message and to the
"Require" header of the "1xx" provisional message.
•
If set to "N", the option tag 100rel will not be used.
Y
Enable 100rel (RFC 3262)
INTEGER
Specifies the retransmission interval, in seconds, for "18x" responses.
0, 1–600 (0: Disable)
0
INTEGER
Specifies the length of time, in seconds, that the subscription remains
valid. This value is set in the "Expires" header of the SUBSCRIBE
request.
1–4294967295
3600
INTEGER
Specifies the percentage of the "expires" value after which to refresh
subscriptions by sending a new SUBSCRIBE message in the same
dialog.
1–100
50
5.3.22 SIP Settings
Administrator Guide 277