Panasonic KX-HDV130 Manual page 18

1.1.6 Web User Interface Programming
Configuring Settings from the Unit
KX-HDV130/KX-HDV230
To open the unit's Web port
[In standby mode]
1.
2.
[ ]/[ ]: "Basic Settings" →
3.
[ ]/[ ]: "Other Option" →
4.
[ ]/[ ]: "Embedded Web" →
5.
[ ]/[ ]: "On" for "Embedded Web" →
To close the unit's Web port
[In standby mode]
1.
2.
[ ]/[ ]: "Basic Settings" →
3.
[ ]/[ ]: "Other Option" →
4.
[ ]/[ ]: "Embedded Web" →
5.
[ ]/[ ]: "Off" for "Embedded Web" →
Note
The "Embedded Web" settings can also be configured with the following procedure.
Press the
1.
[ ]/[ ]: "System Settings" →
2.
[ ]/[ ]: "Network Settings" →
3.
[ ]/[ ]: "Embedded Web" →
KX-HDV330/KX-HDV430
To open the unit's Web port
[In standby mode]
1.
Tap / → "Basic Settings"
2.
Tap / → "Other Option"
3. Tap "Embedded Web"
4. Select "On" → "OK"
To close the unit's Web port
[In standby mode]
1.
Tap / → "Basic Settings"
2.
Tap / → "Other Option"
3.
Tap "Embedded Web"
4. Select "Off" → "OK"
18 Administrator Guide
OK
OK
OK
OK
OK
OK
button when the unit is in standby mode.
OK
OK
OK
OK
OK
Document Version: 2017-07