5.3.22 SIP Settings
TRANSFER_RECALL_TIM
Value Format
Description
Value Range
Default Value
SIGNAL_COMPRESSION_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
MAX_BREADTH_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
MUTIPART_BOUNDARY_DELIMITTER_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
RINGTONE_183_180_ENABLE_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
Description
Value Range
Default Value
284
Administrator Guide
INTEGER
Specifies the time that the original call is resumed when the
forwarding party does not response by Refer method for call transfer.
0, 1–240
0
INTEGER
Specifies whether to use signal compression. When using signal
compression, select Required or Supported.
•
0: Disable
•
1: Enable (Required)
•
2: Enable (Supported)
0
INTEGER
Specifies the Max Breadth that is max Folk number at Proxy.
0–99 (0: Not add max-breadth header)
60
STRING
Specifies the strings that indicates the boundary for Multipart Bodies.
Max. 70 characters
boundary1
BOOLEAN
Specifies whether to ring the local ringback tone when 180 is
received after receiving 183 Early media.
•
Y: Performs ringback tone after early media
•
N: Does not perform
N
Document Version: 2017-07