Settings Using Configuration File Programming - Panasonic KX-HDV130 Manual

6.3.2 Settings using Configuration File Programming

•
Button 1 is set to log in and log out of an ACD group on line 6.
•
Buttons 2, 6 and 10 are set to show the status of a certain extension. They can also be used to call that
extension and transfer calls to it.
•
Buttons 3, 7 and 9 are set to make calls to a certain destination using the One-Touch Dialing feature.
•
Button 4 is set to log in and log out of an ACD group on line 5.
•
Buttons 5 and 8 are set to make calls to a certain destination using the Line feature.
You can also assign extension numbers automatically to BLF buttons using the information in the server's resource list without
*1
having to input information here.
6.3.2 Settings using Configuration File Programming
Flexible keys can be configured by configuration file programming using a combination of 3 parameters:
•
Parameter 1 refers to either "FLEX_BUTTON_FACILITY_ACTx" or "DSS_BUTTON_FACILITY_ACTx".
•
Parameter 2 refers to either "FLEX_BUTTON_FACILITY_ARGx" or "DSS_BUTTON_FACILITY_ARGx".
•
Parameter 3 refers to either "FLEX_BUTTON_LABELx" or "DSS_BUTTON_LABELx".
Details about parameters 1 and 2 are explained in the following table.
Note
•
For parameter 2, value 1 and value 2 must be separated by a comma.
Parameter 1
Value
X_PANASONIC_IPTEL_
ONETOUCH
X_PANASONIC_IPTEL_
BLF
X_PANASONIC_IPTEL_
LINE
X_PANASONIC_IPTEL_
ACD
X_PANASONIC_IPTEL_
WRAPUP
X_PANASONIC_IPTEL_
LINESTATUS
X_PANASONIC_IPTEL_
FORWARD
372 Administrator Guide
*1
Value 1
Phone Number Line Number
(Max. 32 (1–n)
characters)
Phone Number Line Number
(Max. 32 (1–n)
characters)
Line Number
(1–n)
Line Number
(1–n)
Line Number
(1–n)
-
Phone Number
(Max. 32
characters)
Parameter 2
Value 2
Line 1 is set when value 2 is "1", "0",
or "None".
Line 1 is set when value 2 is "1", "0",
or "None".
The default line is set when value 1 is
-
"0" or "None".
The default line is set when value 1 is
-
"0" or "None".
The default line is set when value 1 is
-
"0" or "None".
-
-
Note
-
-
Document Version: 2017-07