Kyocera ECOSYS P8060cdn Operation Manual page 348

Troubleshooting > Adjustment/Maintenance
2
3
4
Display the screen.
[System Menu/Counter] key > [Adjustment/Maintenance] > "Color Registration" [Next] >
"Detail" [Next]
Print the chart.
Select "Chart" [Print].
A chart is printed. On the chart, for each of M (magenta), C (cyan) and Y (yellow), charts for
H-1 to 7 and V-1 to 5 are printed.
Chart Example
Enter the appropriate value.
1
Find the location on each chart where 2 lines most closely match. If this is the 0 position,
registration for that color is not required. For the illustration, B is the appropriate value.
From charts V-1 to V-5, read only the values from V-3 (center).
2
Select "Color Registration" [Next].
3
Select [Change] for the chart to be corrected.
4
Select [+] or [-] to enter the values read from the chart.
Select [+] to increase the value from 0 to 9. To decrease, select [-].
By selecting [-], the value changes from 0 to alphabetic letters, going from A to I. To move
in the reverse direction, select [+].
5
Repeat steps 3 and 4 to enter the registration values for each chart.
10-37