Wan Connection - Panasonic KX-HTS824 Getting Started

3.13 WAN Connection

3.13 WAN Connection
Description
The following protocols are supported for setting the IP address of the WAN interface.
WAN Type
Dynamic IP Address
Static IP Address
PPPoE
You can confirm the current connection status of the WAN interface in Web Maintenance Console.
For details about the WAN Status, refer to "Network Configuration-[3-6]WAN Status" in the Programming
Item List.
Conditions
• If the protocol for setting the IP address is changed, you must perform a System Reset and restart the
PBX before the setting can be applied.
• When the built-in router is active, it serves as the default gateway on the LAN-side of the network. The
gateway address distributed by the DHCP feature will be changed to the LAN port's IP address.
•
For details about what values to use for configuring the protocol for specifying an IP address, consult the
network administrator.
90
Retrieves an IP address dynamically from your service provider.
Sets a static IP address.
Obtains an IP address dynamically from a PPPoE server.
Description