Panasonic KX-HTS824 Getting Started page 105

TEMPLATE FOR WALL MOUNTING
1.
Copy or print this template and place it on the
wall.
2.
Install the screws as marked. If you mount the
main unit on a concrete, fit anchor plugs(not
included) into the wall beforehand.
3.
Hook the unit onto the screw heads.
Note
• Make sure to set the print size to
correspond with the size of this page.
• If the dimensions of the paper output still
deviate slightly from the measurements
indicated here, use the measurements
indicated here.
A 225mm (8-7 / 8 in)
(1) Install a screw here.
(1)
A
(1)
7.1 System Prompt Languages
105