Panasonic KX-HTS824 Getting Started page 89

•
Press the WPS setting button on the wireless extension for the specified amount of time.
b.
Connection using PIN code input
There is a connection method where the PIN code set at the HTS Series unit is input into the wire-
less extension, and a connection method where the PIN code set at the wireless extension is input
into the HTS Series unit. The procedure described here is for inputting the PIN code set at the HTS
Series unit into the wireless extension.
•
Input the PIN code as the HTS Series' Current Router PIN. For details about the Wireless LAN
Connection, refer to "Network Configuration-6.Wireless" in the Programming Item List.
•
Refer to the instruction manual of the wireless extension and register the PIN code set in the
HTS Series unit to the wireless extension.
•
Click the "Connect" button of the HTS Series unit.
•
Perform PIN code receiving using the wireless extension.
c.
Connection using manual settings
Manually set the necessary settings on the wireless extension. Use the settings of the HTS Series
unit for setting the wireless extension's settings.
SSID
Security type
Passphrase
CAUTION
• If settings related to security are not performed, the following problems may occur.
– Transmission contents may be intercepted by a third party.
– There may be an illegal system intrusion by a third party.
Note that according to wireless LAN specifications, it is possible to break through the security settings
using special methods. Therefore, use security settings with a full understanding of them.
Note
For details about what values to use for configuring the protocol for specifying an IP address, consult the
network administrator.
3.12.2 Wireless LAN Connection
89