Selecting Alternate Sounds For The Kick/Snare - DigiTech SDRUM Owner's Manual

Selecting Alternate Sounds for the Kick/Snare

The following table shows the alternate kick and snare sounds available for each drum kit:
Drum Kit
E-POP
BRUSH
PERCUSSION
POWER
CLEAN
To select alternate sounds for the kick and snare:
1. Select the song part using the VERSE, CHORUS, or BRIDGE button.
2. Press the ALT button next to the GROOVE/KIT encoder to toggle between the options listed in the table
above.
3. Repeat for other song parts, if desired.
Selecting Drum Pattern Settings
LED Off
Electronic-Pop Kick 1 and Snare 1
Brush Kick and Snare
Low Timbale and High Timbale
Power Kick 1 and Snare 1
Clean Kick and Snare
ALT Button (Groove/Kit)
Electronic-Pop Kick 2 and Snare 2
Brush Kick and Tambourine
Percussion Kick and Snare
Power Kick 2 and Snare 2
Clean Kick and Sidestick
LED Green
18