Technical Specification; General Cautions - Clarion BTS33 User Manual

11.- TECHNICAL SPECIFICATION.

GENERAL
source power:...13.2 V (10.8 a 15.6 )
Current:........................ Max.10 A
Impedance speakers: 4 ohms
Tune FM
Frequencies:..............87,5 MHz a 108 MHz
Quiet sensitivity:................<10 dB mv
Stereo separation:.................>22 dB, 1 kHz
Signal/ noise relation:..............>65 dB
Tune AM
frequencies......... 530 ～ 1710KHz (LAM) 522 ～ 1620KHz (GOM)
Quiet sensitivity:................<30 dB µV
Signal/noise relation:................ >50 dB
Step frecuency manual/ automatic: AM_10KHz/10KHz (Southameric), 9KHz/9KHz rest world),
FM_50KHz/50KHz
CD
Signal / Noise relation:..........>70 dB
Separation:.........................> 50dB (1KHz)
Frequency response..17 MHz 0±5, 20 KHz 0±5
USB
Signal / Noise relation:..........>74 dB
Separation:.........................> 50dB( 1KHz)
Frequency response..17 MHz 0±5, 20 KHz 0±5
AUX
Signal / Noise relation:..........>60 dB, Output 1W, 300 mV Input
Separation:.........................> 45dB.(1KHz), Output 1W, 300 mV Input
Frequency response..17 MHz 0±5, 20 KHz 0±5

12.- GENERAL CAUTIONS

1.- This device is equipped with high-sensitivity in buttons; avoid applying excessive force
to operates, as this can damage them and reduce their life.
2.- Do not open the covers. The device does not have in its interior parts that can be
repaired by the user. If you leaves drop an object inside the unit during installation, checked
with your dealer or its authorized service center.
3.- Use a soft, dry cloth to clean the control panel, NEVER use rough cloths, thinner,
gasoline, alcohol, etc. If the unit is too dirty, apply a bit of warm water with a soft cloth,
and carefully remove the dirt.