To Set A Desired Speed; To Vary The Speed Setting - Alfa Romeo 4C User Manual

WARNING!
Leaving the Speed Control system on when not
in use is dangerous. You could accidentally set
the system or cause it to go faster than you
want. You could lose control and have an acci-
dent. Always leave the system off when you are
not using it.

To Set A Desired Speed

Turn the Speed Control on. When the vehicle has
reached the desired speed, move the speed con-
trol lever upward (+), and release. Release the
accelerator, and the vehicle will operate at the set
speed.
NOTE:
The vehicle should be traveling at a steady speed,
and on level ground before setting the speed
control.
To Var y The Speed Setting
To Increase Speed
When the Speed Control is set, you can increase
speed by tapping the speed control lever up (+).
The speed increment shown is dependant on the
speed of U.S. (mph) or Metric (km/h) units:
U.S. Speed (mph)
• Tapping the speed control lever up (+) once will
result in a one mph increase in set speed. Each
subsequent tap of the lever results in an in-
crease of one mph.
• If the lever is continually help up, the set speed
will continue to increase until the lever is re-
leased, then the new set speed will be
established.
Metric Speed (km/h)
• Tapping the speed control lever up (+) once will
result in a two km/h increase in set speed. Each
subsequent tap of the lever results in an in-
crease of two km/h.
• If the lever is continually help up, the set speed
will continue to increase until the lever is re-
leased, then the new set speed will be
established.
To Decrease Speed
When the Speed Control is set, you can decrease
speed by tapping the speed control lever down (-).
The speed decrement shown is dependant on the
speed of U.S. (mph) or Metric (km/h) units:
U.S. Speed (mph)
• Tapping the speed control lever down (-) once
will result in a one mph decrease in set speed.
Each subsequent tap of the lever results in a
decrease of one mph.
• If the lever is continually held down, the set
speed will continue to decrease until the lever is
released, then the new set speed will be
established.
Metric Speed (km/h)
• Tapping the speed control lever down (-) once
will result in a two km/h decrease in set speed.
Each subsequent tap of the lever results in a
decrease of two km/h.
• If the lever is continually held down, the set
speed will continue to decrease until the lever is
released, then the new set speed will be
established.
77