Blue Indicator Lights; Onboard Diagnostic System - Obd; Onboard Diagnostic System (Obd Ii) Cybersecurity - Alfa Romeo 4C User Manual

Blue Indicator Lights

— High Beam Indicator Light
This indicator shows that the high beam head-
lights are on. With the low beams activated, push
the multifunction lever forward (toward the front of
the vehicle) to turn on the high beams. Pull the
multifunction lever rearward (toward the rear of
the vehicle) to turn off the high beams. Pull the
lever toward you for a temporary high beam on,
"flash to pass" scenario.
ONBOARD DIAGNOSTIC
SYSTEM — OBD II
Your vehicle is equipped with a sophisticated
onboard diagnostic system called OBD II. This
system monitors the performance of the emis-
sions, engine, and Alfa Twin Clutch Transmission
control systems. When these systems are operat-
ing properly, your vehicle will provide excellent
performance and fuel economy, as well as engine
emissions well within current government regula-
tions.
If any of these systems require service, the OBD II
system will turn on the "Malfunction Indicator
Light (MIL)". It will also store diagnostic codes
and other information to assist your service tech-
nician in making repairs. Although your vehicle will
usually be drivable and not need towing, see your
authorized dealer for service as soon as possible.
CAUTION!
• Prolonged driving with the MIL on could
cause further damage to the emission con-
trol system. It could also affect fuel economy
and driveability. The vehicle must be ser-
viced before any emissions tests can be
performed.
• If the MIL is flashing while the vehicle is
running, severe catalytic converter damage
and power loss will soon occur. Immediate
service is required.
Onboard Diagnostic System (OBD II)
Cybersecurity
Your vehicle is required to have an Onboard Diag-
nostic system (OBD II) and a connection port to
allow access to information related to the perfor-
mance of your emissions controls. Authorized ser-
vice technicians may need to access this informa-
tion to assist with the diagnosis and service of
your vehicle and emissions system.
WARNING!
• ONLY an authorized service technician
should connect equipment to the OBD II
connection port in order to diagnose or ser-
vice your vehicle.
• If unauthorized equipment is connected to
the OBD II connection port, such as a driver-
behavior tracking device, it may:
• Be possible that vehicle systems, in-
cluding safety related systems, could
be impaired or a loss of vehicle control
could occur that may result in an acci-
dent involving serious injury or death.
• Access, or allow others to access, infor-
mation stored in your vehicle systems,
including personal information.
For further information, refer to "Cybersecurity" in
"Multimedia" in your Owner's Manual at
www.alfaromeousa.com/owners/
owners-service-manual (U.S. Residents)
www.owners.mopar.ca (Canadian Residents) for
further information.
or
37