Trip Functions; New Trip; Start Of Trip Procedure; Exit Trip - Alfa Romeo 4C User Manual

Hide thumbs Also See for 4C:
Table of Contents

Advertisement

Trip Functions

Both trip functions are resettable (reset — start of

new trip).

"Trip A" can be used to display the figures relating
to:
• Range
• Average Fuel Consumption
• Travel Distance
• Current Fuel Consumption
• Average Speed
• Travel Time
"Trip B" can be used to display the figures relating
to:
• Average Fuel Consumption
• Travel Distance
• Average Speed
• Travel Time
NOTE:
"Trip B" functions may be excluded (see "Trip B
Data"). "Range" and "Instantaneous Fuel Con-
sumption" cannot be reset.
New Trip
To reset:
• Push and hold the TRIP button to reset the
system manually.
• When the "Trip distance" reaches 99999.9 ki-
lometers (621370 miles) or when the "Travel
time" reaches 99.59 (99 hours and 59 min-
utes), the system is reset automatically.
• Disconnecting/Reconnecting the battery resets
the system.
NOTE:
If the reset operation occurs in the presence of the
screens concerning Trip A or Trip B, only the infor-
mation associated with Trip A or Trip B functions
will be reset.

Start Of Trip Procedure

With the ignition on, push and hold the TRIP
button for over two seconds to reset trip informa-
tion.

Exit Trip

To exit the Trip function, wait until all the values
have been displayed or hold the MENU button for
longer than one second.
Briefly push and release the MENU button to go
back to the menu screen or push and hold the
MENU (approximately one second) to go back to
the main screen without storing settings.
WARNING LIGHTS AND
MESSAGES

Red Warning Lights

— Brake Warning Light
This light monitors various brake functions, includ-
ing brake fluid level and parking brake applica-
tion. If the brake light turns on it may indicate that
the parking brake is applied, that the brake fluid
level is low, or that there is a problem with the
anti-lock brake system reservoir.
If the light remains on when the parking brake has
been disengaged, and the fluid level is at the full
mark on the master cylinder reservoir, it indicates
a possible brake hydraulic system malfunction or
that a problem with the Brake Booster has been
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

4c20184c spider

Table of Contents