New Trip; Start Of Trip Procedure; Exit Trip; Warning Lights And Messages - Alfa Romeo 4C Owner's Manual

New Trip

To reset:
• Push and hold the TRIP button to reset the system
manually.
• When the "Trip distance" reaches 99999.9 kilometers
(621370 miles) or when the "Travel time" reaches
99.59 (99 hours and 59 minutes), the system is reset
automatically.
• Disconnecting/Reconnecting the battery resets the
system.
NOTE: If the reset operation occurs in the presence of
the screens concerning Trip A or Trip B, only the
information associated with Trip A or Trip B functions
will be reset.

Start Of Trip Procedure

With the ignition on, push and hold the TRIP button for
over two seconds to reset trip information.

Exit Trip

To exit the Trip function, wait until all the values have
been displayed or hold the MENU button for longer
than one second.
GETTING TO KNOW YOUR INSTRUMENT PANEL 69
Briefly push and release the MENU button to go back to
the menu screen or push and hold the MENU (approxi-
mately one second) to go back to the main screen
without storing settings.

WARNING LIGHTS AND MESSAGES

Red Warning Lights

— Brake Warning Light
This light monitors various brake functions, including
brake fluid level and parking brake application. If the
brake light turns on it may indicate that the parking brake
is applied, that the brake fluid level is low, or that there is
a problem with the anti-lock brake system reservoir.
If the light remains on when the parking brake has been
disengaged, and the fluid level is at the full mark on the
master cylinder reservoir, it indicates a possible brake
hydraulic system malfunction or that a problem with the
Brake Booster has been detected by the Anti-Lock Brake
System (ABS) / Electronic Stability Control (ESC) system.
In this case, the light will remain on until the condition has
been corrected. If the problem is related to the brake
booster, the ABS pump will run when applying the brake,
and a brake pedal pulsation may be felt during each stop.
4