Change Engine Oil Indicator System - Alfa Romeo 4C Owner's Manual

58 GETTING TO KNOW YOUR INSTRUMENT PANEL
• Down Arrow Button
Push and release the down arrow button to
scroll downward through the main menu and
submenus or to decrease the displayed value.
Outside of the menu, the down arrow will
adjust the brightness of the instrument panel.
• Set/Back Arrow Button
Push and release the SET/BACK arrow button to
access/select the information screens or submenu
screens of a main menu item. Push and hold the
SET/BACK arrow button to return to the main menu
from an info screen or submenu item.

Change Engine Oil Indicator System

Your vehicle is equipped with an engine oil
change indicator system. The "Change Engine Oil"
message will flash in the instrument cluster display for
approximately ten seconds and the oil pressure warning
light will illuminate. The "Change Engine Oil" message
in the instrument cluster display and the oil pressure
warning light will turn off after approximately ten
seconds.
Reset the Oil Change Reminder message as follows:
1. Without pushing the brake pedal, cycle the ignition
to the MAR/ON/RUN position (do not start the
engine).
2. Push and hold the accelerator pedal.
3. Push and release the brake pedal six times; with a
one second pause between each push of the brake
pedal.
4. After the 6th release of the brake pedal, pause one
second and then release the accelerator pedal.
NOTE: Consult your authorized dealer if the oil change
indicator message does not reset.