Getting To Know Your Vehicle 31; Daytime Running Lights; High Beams; Flash-To-Pass - Alfa Romeo 4C Owner's Manual

Daytime Running Lights

To activate the Daytime Running Lights (DRL), rotate
the end of the multifunction lever to the O symbol.
NOTE: The low beams and side/tail lights will not be
on with DRL.

High Beams

With the low beams activated, pull the multi-
function lever towards the steering wheel to turn
on the high beams. A high beam symbol will illuminate
in the cluster to indicate the high beams are on. Pull the
multifunction lever a second time to switch the head-
lights back to low beam.

Flash-To-Pass

You can signal another vehicle with your headlights by
partially pulling the multifunction lever toward the
steering wheel. This will cause the high beam head-
lights to turn on until the lever is released.

GETTING TO KNOW YOUR VEHICLE 31

Parking Lights

To turn on the parking lights, remove the key
or turn the ignition to OFF/LOCK position
and turn on the headlights.

Follow Me Home/Headlight Delay

When this feature is selected, the driver can choose to
have the headlights remain on for a preset period of
time after the engine is turned OFF.
Activation
Remove the key or turn the ignition to the STOP
(OFF/LOCK) position, and pull the multifunction lever
toward the steering wheel within two minutes. Each
time the lever is pulled, the activation of the lights will
be extended by 30 seconds. The activation of the lights
can be extended to a maximum of 210 seconds.
Deactivation
Pull the multifunction lever toward the steering wheel
and hold it for more than two seconds.
3