Troubleshooting - Bissell 1987 SERIES Manual

Troubleshooting

Problem
Vacuum won't
turn on
Vacuum
cleaner has
low suction
Visible dirt
escaping from
vacuum
Hand vacuum
won't charge
Please do
not return
this product
to the store.
10
www.BISSELL.com
Possible causes
Battery is fully discharged
Dirt container is full
Dirt container is not installed
properly
Filters need cleaning
Filters need replacing
Battery needs charging
Dirt container is full of debris
Filter is missing or installed
incorrectly
Machine is in the ON position
Not the correct charger
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
For any questions or concerns, BISSELL is happy to
be of service.
WARNING
To reduce the risk of electric shock, turn power switch
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
Remedies
Charge battery. Follow charging
battery instructions on page 5
Empty dirt container
Position container correctly and
snap firmly into place
Follow filter instructions on page 7
Visit www.bissell.com or call 1-800-
237-7691 to order replacement filters
Charge battery. Follow charging
battery instructions on page 5
Empty dirt container
Check filter for correct installation
Set the hand vacuum in the OFF
position
Use only the charger that comes with
the machine