Operating Instructions - Genie Z-34/22n Operator's Manual

First Edition
800-610-4101
ActionRental.com
Do Not Operate Unless:
You learn and practice the principles of safe
machine operation contained in this operator's
manual.
1 Avoid hazardous situations.
2 Always perform a pre-operation
inspection.
3 Always perform function tests prior to use.
4 Inspect the work place.
5 Only use the machine as it was intended.
Fundamentals
The Operating Instructions section provides
instructions for each aspect of machine operation.
It is the operator's responsibility to follow all the
safety rules and instructions in the operator's,
safety and responsibilities manuals.
Using the machine for anything other than lifting
personnel and tools to an aerial work site is unsafe
and dangerous.
Only trained and authorized personnel should be
permitted to operate a machine. If more than one
operator is expected to use a machine at different
times in the same work shift, they must all be
qualified operators and are all expected to follow all
safety rules and instructions in the operator's,
safety and responsibilities manuals. That means
every new operator should perform a pre-operation
inspection, function tests, and a work place
inspection before using the machine.
Part No. 36539

Operating Instructions

Emergency Stop
Push in the red Emergency Stop button to the off
position to stop all ground and platform control
functions.
Repair any function that operates from the ground
or platform controls when the Emergency Stop
button at the ground controls is pushed in.
Repair any function that operates from the platform
when the Emergency Stop button at the platform
controls is pushed in.
Selecting and operating the ground controls will
override the platform Emergency Stop button.
Auxiliary Controls
Use auxiliary power if the primary power source
fails.
1 Turn the key switch to ground or platform
control.
2 Pull out the red Emergency Stop button to the
on position.
3 Press down the foot switch when operating the
auxiliary controls from the platform.
4 Simultaneously hold auxiliary power switch
and activate desired function.
The boom, steer and drive functions will operate
with auxiliary power.
Genie Z-34/22 & Genie Z-34/22N
Operator's Manual
ON
17