Precautions - Alpine iXE-W400E Owner's Manual

Precautions

Be sure to disconnect the cable from the (–) battery
post before installing your iXE-400E. This will
reduce any chance of damage to the unit in case of
a short circuit.
• Be sure to connect the colour coded leads according
to the diagram. Incorrect connections may cause the
unit to malfunction or damage to the vehicle's
electrical system.
• When making connections to the vehicle's electrical
system, be aware of the factory installed components
(e.g. on-board computer). Do not tap into these leads
to provide power for this unit. When connecting the
iXE-400E to the fuse box, make sure the fuse for the
intended circuit of the iXE-400E has the appropriate
amperage.Failure to do so may result in damage to
the unit and/or the vehicle. When in doubt, consult
your Alpine dealer.
• The iXE-400E uses female RCA-type jacks for
connection to other units (e.g. amplifier) having RCA
connectors. You may need an adaptor to connect
other units. If so, please contact your authorised
Alpine dealer for assistance.
• Be sure to connect the speaker (–) leads to the
speaker (–) terminal. Never connect left and right
channel speaker cables to each other or to the
vehicle body.
IMPORTANT
Please record the serial number of your unit in the space
provided below and keep it as a permanent record. The serial
number plate is located on the bottom of the unit.
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
25-EN