Setting - Alpine iXE-W400E Owner's Manual

Setting

Click to enter setting menu.
1
Brightness Setting: Click the button 【Enter】
on the right side to enter brightness adjustment
interface.
AUTO: Set the backlight brightness into automatic,
meaning that it will adjust automatically based on
the detection by small lamps
Day: Set the backlight brightness into daytime
mode, and 7 levels are available for adjustment.
The intermediate value is defaulted.
Night: Set the backlight brightness into night
mode, and 7 levels are available for adjustment.
The intermediate value is defaulted.
16-EN
2
Key Sound: Beep available on operation panel
and direction control button with high, mid and
low volume level and defaults to "mid",
OFF: Close beep on the button.
3 FM Frequency: Stepping setting of radio.
50KHz: 50KHz for FM stepping;
1
100KHz: 100KHz for FM stepping (defaulted).
2
3
4 Bluetooth Setting: Click 【Enter】 on the right
4
side to enter bluetooth setting interface. See
5
details in page 5-9 of bluetooth setting function.
6
Microphone Vol: High, mid and low volume
5
setting and defaults to "mid".
6
Sound Setting: Click 【Enter】 on the right side
7
to enter sound effect adjustment page at default.
8
You can choose sound effect adjustment and
9
sound field adjustment at the top of the page.
10
11
12
1)
13
14
2)
15
16
3)
1)Sound effect setting (8 types), and sound effect
value can be set under respective sound mode.
2)There are 7 sound effect modes to choose with
"standard" being defaulted.
3)Display the position of acoustics and sound
effect inside your vehicle.
4)Click
and sound effect, and click
position of acoustics and sound effect to centre
point (default).
to adjust the position of acoustics
to restore the
4)