Description Of Reversing Function - Alpine iXE-W400E Owner's Manual

Description of reversing function

1. When Camera Setting is RCA IN in
camera video screen will appear when the vehicle
rolls back, see the following figure:
The display of reversing video is assigned highest
priority under any Source, along with voice warning
to hint.Please pay attention to the real situation
behind your car while reversing.
Reference line on the screen
Color line is reference only,Distance is depending
on camera fitment.
2.When Camera Setting is DIRECT IN in
camera video screen will appear when the vehicle
rolls back, see the following figure:
Four visual angles including Rear, Panorama,
Corner, Top can switch over.
3. When Camera Setting is OFF, no display of
reversing video is accepted by the hose machine.
Note:
In case the car body is inclined based on the fact
that there have several passengers sitting in the
,then
car and/or the luggage in the trunk is too heavy or
placed unevenly and/or the road surface is poor,
the reference line displayed in the visual system
of reversing shall not be identical to the real posi-
tion on the road surface.
The reference line indicating the distance and
width on the screen is designed based on a hori-
zontal and flat road surface. The distance of the
object displayed on the screen will be far more
than its real distance in the following situation.
The reference line displayed on the screen can
only be used to estimate the object on the same
horizontal level when the second half of car body
is pressed down by the weight of passengers and
luggage put together. So, please do not estimate
the distance between your car and the obstacle
entirely counting on the visual system of reversing
as the distance of object displayed on the screen
may have discrepancy with the real situation.
,then
19-EN