Assembly Disassembly Side Panels - RIKA LIVO AH Operating Manual

6. ASSEMBLY DISASSEMBLY SIDE PANELS
Note
Only work on the unit when the mains plug has been disconnected
and the stove has cooled down completely.
Note
During assembly / dismantling do not allow objects (screws etc.) to
fall into the pellet container – they can block the screw conveyor
and damage the stove.
Note
During any conversion work, take particular care of your fingers
and any panels and stove attachments. Select soft bases to
prevent scratches to your living space furniture and stove panels.
Lift the convection fin straight up.
Open the pellet container lid.
Now loosen the two hexagonal screws and tilt the rear side panel.
Subsequently, lift the rear side panel to remove it.
Now loosen the two hexalobular screws and tilt the front side panel.
Subsequently, lift the front side panel to remove it.
Install the removed parts in reverse order.
#8
#25
|15
14