Assembly/Dismantling Stone And Options; Disassembly Of The Front Side Casing; Disassembly Of The Rear Side Panel - RIKA COMO TOUCH Operating Manual

6. ASSEMBLY/DISMANTLING STONE AND OPTIONS

Note
Only work on the unit when the mains plug has been disconnected and the
stove has cooled completely.
Note
During assembly / dismantling do not allow objects (screws etc.) to fall into
the pellet container – they can block the screw conveyor and damage the
stove.
Note
During any conversion work, take particular care of your fingers and any
panels and stove attachments.
Select soft bases to prevent scratches to your living space furniture and
stove panels.

Disassembly of the front side casing

Remove the lower front panel by simply lifting. The front panel is simply hooked.
Remove the convection fins by lifting slightly. The convection fins are only
suspended.
Remove the 2 vertical hexagonal screws used to attach the front right side
panel.
You can now lift and remove the right front side panel easily.
Install the removed parts in reverse order.
The dismantling of the left front side panel is analogous to removing the right
front side pane.

Disassembly of the rear side panel

Open the container lid.
Remove the 2 vertical hexagonal screws used to attach the right rear side
panel.
You can now lift the right rear side panel.
Install the removed parts in reverse order.
The disassembly of the left rear side panel is analogous to removing the right
rear side panel.
#8
#8
|13
12