Canon iPF6300 User Manual page 802

Printer Parts > Control Panel
Sys-
tem
Setup
8
786
Menu Settings
>
Setting Item
Detect Mismatch
Paper Roll Selection 1
Size
Basis
Roll Selection 2
Keep Paper Size
TrimEdge Reload
Rep.P.head Print
Nozzle Check
Description, Instructions
Choose Pause to have printing paused under these
circumstances. Choose Warning to continue print-
ing after notification. Choose None to continue
printing without notification.
If roll size detection is activated, choose whether
ISO A3 (297mm) or 300mm Roll is applied when
a roll of an intermediate width is detected.
If roll size detection is activated, choose whether
10in. (254mm) or JIS B4 (257mm) is applied
when a roll of an intermediate width is detected.
Choose On to use the paper size setting as the basis
for printing instead of other settings. The margin
setting of the printer menu will be used instead of
the margin setting of the printer driver if the latter
is smaller, which may prevent text or images in the
margin from being printed.
Choose Off to give priority to margin settings. The
larger value is used if the margin specified in the
printer driver does not match the margin in the
printer menu.
Specify whether to trim the leading edge of the cur-
rently retracted roll when the roll is advanced. Cut
the edge if you are concerned about any marks left
on the roll when the roll is left in the retracted posi-
tion.
Specify On to have rolls cut when printing begins
after Sleep mode or when the power is restored. Se-
lecting Automatic will trim the edge when the roll
has been in the retracted position for two days or
more.
Choose On to have the printer automatically exe-
cute the Advanced Adj. operations after you re-
place the Printhead. (See "Automatic Adjustment
to Straighten Lines and Colors (Head Posi.
Adj.).")
→P.712
In Frequency, specify the timing for automatic
checks of nozzle clogging. Choose Standard to
have the printer adjust the timing for checks based
on the frequency of nozzle use. Choose 1 page to
check once per page.
iPF6300