Konica Minolta bizhub C658 Quick Start Manual page 244

5.4 Copy
2
Tap [Copy].
3
Tap [Paper], select a paper tray to load paper into in order to copy a card, then tap [Close].
% If you specify [Card Shot], you must specify a paper tray other than [Auto].
4
Tap [Application], then select [Card Shot].
5
Tap [ON], then configure each item so that it corresponds with the finishing image.
Settings
[Original Size]
[Registered Paper Size]
[Layout]
[Zoom]
6
Tap [OK].
7
Press the Start key.
The front side of the card is scanned.
8
Turn the card over, and place it on the Original Glass.
bizhub C658/C558/C458/C368/C308/C258
Description
Enter the size of a card to be copied. Alternatively, you can recall
the preregistered size from [Registered Paper Size].
After you have entered the size, select a key in [Registered Paper
Size], and tap [Register]. Then the size you have entered is regis-
tered in the memory.
Displays the sizes registered in memory.
When you call a registered size from the memory, tap the key of the
desired registration name, then tap [Recall].
To change a registration name, select a desired key, then tap
[Change registered size name].
Select how to arrange the front and back sides of a card on paper.
Select a zoom ratio for copying.
• [Full Size]: Copy by enlarging according to the paper size.
• [x1.0]: Copy with the same size as the card.
5
5-39