Listening To Dab Radio (R-N803D); Preparing The Dab Tuning; Selecting A Dab Radio Station For Reception - Yamaha R-N803 Owner's Manual

Hide thumbs Also See for R-N803:

Update manual (3 pages)

Owner's manual (73 pages)

Table Of Contents

Table of Contents

DAB (Digital Audio Broadcasting) uses digital signals for

clearer sound and more stable reception compared to

analog signals. This unit can also receive DAB+ (an

upgraded version of DAB) that allows for more stations

using MPEG-4 audio codec (AAC+), which has a more

efficient transmission method.

Note

This unit supports Band III (174 to 240 MHz) only.

Preparing the DAB tuning

Before tuning in to DAB stations, an initial scan must be

performed. When you select the DAB for the first time,

the initial scan is performed automatically.

To listen to a DAB station, connect the antenna as

described in "Connecting the DAB/FM antenna (R-

N803D)" (p.13).

LINE 1

TUNER

BAND

MEMORY

Press TUNER to select "TUNER" as the input

source.

Press BAND to select the DAB band.

The initial scan starts. During the scan, the progress is

displayed on the front display.

When the scan is complete, the top of the list of the

scanned stations appears on the front display.

Note

• If no DAB radio stations are found by an initial scan, "Not

Found" appears on the front display, followed by "Off Air".

Press BAND twice to re-select the DAB band and scan again.

• You can check reception strength of each DAB channel label (p.

31).

• To perform an initial scan again after some DAB radio stations

are stored, select "Initiate Scan" (p.46) in the "OPTION" menu.

If you perform an initial scan again, the DAB radio stations

currently registered to the preset numbers will be cleared.