Listening To Dab Radio (R-N303D); Preparing The Dab Tuning; Selecting A Dab Radio Station For Reception - Yamaha R-N303 Owner's Manual

Hide thumbs Also See for R-N303:

Owner's manual (63 pages)

Table Of Contents

Table of Contents

DAB (Digital Audio Broadcasting) uses digital signals for clearer sound and more stable reception compared to analog

signals. This unit can also receive DAB+ (an upgraded version of DAB) that allows for more stations using MPEG-4

audio codec (AAC+), which has a more efficient transmission method.

Note

This unit supports Band III (174 to 240 MHz) only.

Preparing the DAB tuning

Before tuning in to DAB stations, an initial scan must be

performed. When you select the DAB for the first time,

the initial scan is performed automatically.

To listen to a DAB station, connect the antenna as

described in "Connecting the DAB/FM antenna (R-

N303D)" (p. 12).

DIMMER

OPTICAL

LINE 1

TUNER

BAND

MEMORY

CLEAR

Press TUNER to select "TUNER" as the input

source.

Press BAND to select the DAB band.

The initial scan starts. During the scan, the progress is

displayed on the front panel display.

When the scan is complete, the top of the list of the

scanned stations appears on the front panel display.

Note

• If no DAB radio stations are found by an initial scan,

"Not Found" will appear on the front panel display,

followed by "Off Air". Press BAND twice to re-select the

DAB band and scan again.

• You can check reception strength of each DAB channel

label (p. 29).

• To perform an initial scan again after some DAB radio

stations are stored, select "Initiate Scan" (p. 37) in the

"OPTION" menu. If you perform an initial scan again, the

DAB radio stations currently registered to the preset

numbers will be cleared.