Dtmf Operation; Setting The Dtmf Memory - Yaesu FT-70DR Advance Manual

z The default setting is "HOLD".
z In the Set Mode [ 21 DW INT ] (see
monitored may be set from 0.1 SEC to 10.0 SEC. (The default setting is "5.0 SEC".)
z When Set Mode [ 23 DW RVT ] (see
without waiting for activity to appear on the priority channel. After transmitting, the transceiver
receives the priority channel and Dual Receive resumes after 5 seconds.

DTMF Operation

DTMF (Dual Tone Multi Frequencies) are the tone signals sent to make telephone calls,
or control repeaters and network links. Up to 10 registers of 16-digit DTMF tone codes
can be stored as telephone numbers to make calls through the public telephone network
using a phone patch or connect through the WIRES-X analog node station.

Setting the DTMF Memory

1. Press and hold the [ F ] key, then rotate the DIAL knob
to select the Set Mode [ 19 DT SET ] .
2. Press the [ F ] key.
The DTMF memory channel number blinks.
3. Rotate the DIAL knob to select the DTMF memory
channel number to register.
4. Press the [ MODE ] key.
The DTMF memory channel input screen is displayed.
5. Use the numeric keypad or DIAL knob to input the
DTMF code maximum of 16 digits.
• Using the numeric key:
The DTMF codes from 0 to 9 may be input.
Rotate the DIAL knob to input A to D, Û or #.
• Using the DIAL knob:
Rotate the DIAL knob to set the DTMF code.
–––  0 to 9  A to F  -  –––
" Û " is displayed "E", "#" is displayed "F"
• Moving the cursor, deleting input characters:
[ BAND ] key:
[ MODE ] key:
Pressing and holding the [ GM ] key:
6. Press the PTT switch to save the setting and return to
normal operation.
• Press the [ F ] key to save the DTMF memory and re-
turn to Set Mode screen.
Moves the cursor to the right
Moves the cursor to the left
Erases all characters after the cursor
32), the interval time at which the priority channel is
32) is set to ON, press the PTT switch to transmit,
21
FT-70DR/DE Advance Manual
Cursor position
(Number of digits)