Assembly Of The Outer Pipe - Shindaiwa T2510 Operator's Manual

Assembly of the Outer Tube
1. Using the hex wrench, loosen the
joint bolt.
Figure 4
IMPORTANT!
The terms "left," "left-hand," and
"LH"; "right," "right-hand," and "RH";
"front" and "rear" refer to directions
as viewed by the operator during
normal operation of this product.
2. Slip the outer tube into the joint
until the tube bottoms. The outer
tube or gearcase shaft may have to
be rotated slightly for the splines
on the mainshaft to fully engage to
the engine.
3. Tighten the joint bolt securely
using the hex wrench.
8
T2510
Fan Cover Housing
Outer Tube Assembly
Mainshaft
Figure 5
C2510
Fan Cover Housing
Outer Tube Assembly
Insert Label
Mainshaft
Figure 5A
Engine Assembly
Tank Guard
Engine Assembly
Tank Guard