Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Shindaiwa PowerBroom X7502235300
Summary of Contents for Shindaiwa PowerBroom X7502235300
- Page 1 X7502235300 05/10 SHINDAIWA OWNER’S/OPERATOR’S MANUAL PB270 POWERBROOM Minimize the risk of injury to yourself and others! Read this manual and familiarize yourself with the contents. Always wear eye and hearing protection when operating this unit. WARNING!
-
Page 2: Table Of Contents
If you have questions regarding your PowerBroom, or if you do not understand something in this manual, contact your local authorized Shindaiwa dealer. You may also contact Shindaiwa Inc. -
Page 3: Safety
Safety and Operation Information Labels: Make sure all information labels are undamaged and read- able. Immediately replace damaged or missing information labels. New labels are available from your local authorized Shindaiwa dealer. WARNING! Never oper- ate power equipment of any kind... - Page 4 Be constantly alert for objects and debris that could be thrown either from the sweeper belts or bounced from a hard surface. Always wear eye and hearing protection. Shindaiwa recommends wearing a face shield as additional face and eye protection. Always operate with both hands firmly gripping the unit.
-
Page 5: Product Description
2-cycle, vertical-cylinder, air-cooled 34 x 30 mm/1.34 x 1.18 in. 27.2 cc/1.7 cu. in. 1.5 HP (1.1 kW) @ 7500 min 50:1 with Shindaiwa Premium 2-cycle mixing oil 660 ml/22.3 oz. TK, diaphragm-type One-piece electronic, transistor controlled Champion CJ8Y / NGK BPMR7A... -
Page 6: Assembly
Assembly Prior to assembly Before assembling, make sure you have all the components required for a complete unit: ■ Engine assembly ■ Outer tube assembly ■ Drum kit with gearcase Connect the Outer Tube to the Powerhead Place the powerhead on a clean, flat surface, spark plug facing up. - Page 7 Assembly (continued) Adjustable Handle Installation Follow these instructions if you wish to use the PowerBroom’s adjustable handle instead of the loop handle on youlr power- head assembly. Remove the powerhead assembly’s loop handle. Remove both screws from the PowerBroom’s adjustable handle assembly.
- Page 8 Assembly (continued) Sweeper Assembly Drum Assembly Push one of the drum axles onto either of the two gearcase output shafts. If necessary, rotate the drum axle until the clevis pin hole in the axle aligns with the matching hole in the gearcase output shaft.
-
Page 9: Mixing Fuel
Mixing Fuel WARNING! Alternative fuels, such as E15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting Shindaiwa requirements are NOT approved for use in Shindaiwa gasoline engines. Use of alternative fuels may cause performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement. -
Page 10: Filling The Fuel Tank
Mixing Instructions 1. Fill an approved fuel container with half of the required amount of gasoline. Add the proper amount of engine oil to gasoline. Close container and shake to mix oil with gasoline. Add remaining gasoline, close fuel container, and remix. -
Page 11: Starting The Engine
Starting the Engine Engine ignition is controlled by a two position switch mounted on the throttle housing labeled, “I” for ON or START and “O” for OFF or STOP. WARNING! Never start the engine from the operating position. Slide the ignition switch to the “ON” position. -
Page 12: Stopping The Engine
ALWAYS make sure the PowerBroom tool is properly installed and firmly tightened before operation. Use only authorized Shindaiwa parts and accessories with your Shindaiwa Multipurpose Tool. Do not make modi- fications to your machine without the written approval of Shindaiwa. -
Page 13: Important
Optional accessories Debris shield p/n 99909-33021 A plastic debris shield is available from your Shindaiwa dealer as a useful option to your PowerBroom. The shield helps prevent broadcasting debris when large volumes of material are forced over the top of the drum during operation. -
Page 14: Maintenance
Maintenance IMPORTANT! MAINTENANCE, REPLACEMENT OR REPAIR OF EMISSION CONTROL DEVICES AND SYSTEMS MAY BE PER- FORMED BY ANY REPAIR ESTABLISH- MENT OR INDIVIDUAL; HOWEVER, WARRANTY REPAIRS MUST BE PER- FORMED BY A DEALER OR SERVICE CENTER AUTHORIZED BY ECHO, INC. THE USE OF PARTS THAT ARE NOT EQUIVALENT IN PERFORMANCE AND DURABILITY TO AUTHORIZED PARTS... - Page 15 If damage, splitting or deterioration is noted, the unit should be removed from service until it can be inspected or repaired by a Shindaiwa-trained service technician. CAUTION! Make sure you do not pierce the fuel line with the end of the hooked wire, the line is delicate and can be damaged easily.
- Page 16 Maintenance (continued) 300-hour maintenance Gearcase Lubrication The gearcase should be filled with 60 cc (2.0 fl.oz.) of Mobil SHC634 Synthetic Gear Oil. A maximum of 75-80 cc can be used, but never to exceed 80 cc. Opera- tion with excessive oil level will result in high operating temperatures.
-
Page 17: Long Term Storage
If carbon deposits are severe or if no per- formance improvement is noted, your unit should be returned to your Shindaiwa dealer for inspection. Long Term Storage Whenever the unit will not be used for 30... -
Page 18: Troubleshooting Guide
89 or higher mixed with an air cooled engine oil that meets or exceeds ISO-L-EGD and/or JASO FD classifi ed oils at 50:1 gasoline/oil ratio. ENGINE DOES NOT START Possible Cause Consult with an authorized Shindaiwa servicing dealer. Faulty recoil starter. Fluid in the crankcase. Internal damage. Tighten and re-test. - Page 19 89 or higher mixed with an air cooled engine oil that meets or exceeds ISO-L-EGD and/or JASO FD classifi ed oils at 50:1 gasoline/oil ratio. Consult with an authorized Shindaiwa servicing dealer. Consult with an authorized Shindaiwa servicing dealer.
- Page 20 Restart. Idle engine until cool. Adjust idle. Check Specifi cations page for correct idle speed. Consult with an authorized Shindaiwa servicing dealer. Adjust idle. Check Specifi cations page for correct idle speed.
- Page 21 The owner shall demonstrate reasonable care and use, and follow preventative maintenance, storage, fuel and oil usage as prescribed in the operator’s manual. Should a product difficulty occur, you must, at your expense, deliver or ship your Shindaiwa unit to an authorized Shindaiwa servicing dealer for warranty repairs (within the applicable warranty period), and arrange for pick-up or return of your unit after the repairs have been made.
- Page 22 89 octane or higher. Gasohol which contains a maximum 10% ethanol (grain alcohol) or 15% MTBE (methyl/ tertiary/butyl/ether) is also approved. The prescribed mixing ratio of gasoline to oil is listed on the Shindaiwa oil label and covered in your operator’s manual.
-
Page 23: Warranty Statement
Authorized Dealer within 100 miles, ECHO Inc. will pay to ship the unit to the nearest authorized dealer. If you have questions regarding your warranty coverage, you should contact ECHO Inc. at 1-800-673-1558, web site WWW.ECHO-USA.COM or contact Shindaiwa at 1-877-986- 7783, web site WWW.SHINDAIWA.COM. - Page 24 NOTES...
- Page 25 NOTES...
- Page 26 NOTES...
- Page 27 NOTES...
-
Page 28: Additional Or Replacement Manuals
Genuine Shindaiwa Parts and Assemblies for your Shindaiwa products are available only from an Authorized Shindaiwa Dealer. When you do need to buy parts always have the Model Number, Type and Serial Number of the unit with you. You can find these numbers on the engine. For future reference, write them in the space provided below.