Description of the item on screen follows:
IPCA Function
This item allows you to Enabled/Disabled the Advanced Configura-
tion and Power Management (ACPI). The settings are Yes and No.
Green PC LED Status
This item determines which state the Power LED will use. The
settings are Blinking, Dual, and Single. During blinking, the power LED will
blink when the system enters the suspend mode. When the mode is in Dual,
the power LED will change its color. Choose the single and the power LED
will always remain lit.
Video Power Down Mode
This option specifies the power conserving state that the VESA
VGA video subsystem enters after the specified period of display inactivity
has expired. The settings are Disabled, Standby or Suspend. The default
setting is Suspend.
Hard Disk Power Down Mode
This option specifies the power conserving state that the hard disk
drive enters after the specified period of hard drive inactivity has expired.
The settings are Disabled, Standby or Suspend. The setup and BIOS default
setting is Standby.
Suspend Time Out (Minute)
This option specifies the length of a period of system inactivity
while in Suspend state. When this length of time expires, the computer
enters Suspend power state. The settings are Disabled, 1 min, 2 min, 4 min, 8
min, 10 min, 20 min, 30 min, 40 min, 50 min or 60 min. The default setting is
Disabled.
®
3-13