Removing The Chassis Cover - Supero SUPERSERVER 1018GR-T User Manual

6-3

Removing the Chassis Cover

You may need to remove the top cover to access the inside of the system for some
of the procedures desccibed in this chapter.
Removing the Chassis Cover:
1. Remove the screw securing the top cover to the chassis.
2. Press both of the release tabs at the same time to release the cover
3. Slide the cover toward the rear of the chassis.
4. Lift the cover up and off of the chassis.
1
4
1
2
Figure 6-2. Removing the Chassis Cover
Chapter 6: Advanced Chassis Setup
1
3
1
2
6-3
1
1
1
1