Collection Of Trouble Logs; Collection Of Event Logs - NEC NovaScale R630 User Manual

COLLECTION OF TROUBLE LOGS

In the event of trouble, you can get information in the procedures described below:
IMPORTANT:
You can perform the procedures described below only when you are asked by your maintenance personnel to get
trouble logs.
When the system restarts after the trouble, it may show a message that there is a shortage of virtual memory.
However, continue the system startup. If you reset and restart the system, you cannot get correct information.

Collection of Event Logs

Collect the logs of various events that have occurred in the Fault Tolerant Server series. It is recommended that you
collect all the logs of [Application Log], [Security Log] and [System log] by the following procedure.
IMPORTANT:
If a STOP error or system error has occurred or the system has stalled, restart the system, and then
start collecting event logs.
1. Click [Start] - [Settings] - [Control Panel] - [Administrative Tools] - [Event Viewer].
2. Select the type of the log to be collected.
[Application Log] contains events related to the applications that were active at occurrence of the events.
[Security Log] contains security-related events. [System Log] contains events that occurred in system
components of Windows Server 2003, Enterprise Edition.
3. Click [Save Log File As...] in the [Action] menu.
4. Enter the name of the target archive log file in the [File name] box.
5. Select the format of the target log file from the [Save as type] list box, and click [OK].
7-29