Magnavox 19MDTR20 Service Manual page 108

3-2. Setting for Y DL Time TV,
Y DL Time EXT, Y SW LPF,
Black Stretch Off,
Black Stretch CONT and
C. Angle Data Values
1. Enter the Service mode. (See page 1-6-1.)
2. Y DL Time TV Adjustment: Press "0" button on
the service remote control unit twice to show "D-T
TV" on the display.
Y DL Time EXT Adjustment: Press "0" button on
the service remote control unit three times to show
"D-T EXT" on the display.
Y SW LPF Adjustment: Press "0" button on the
service remote control unit four times to show "Y
SW" on the display.
Black Stretch Off Adjustment: Press "0" button
on the service remote control unit five times to
show "B-S" on the display.
Black Stretch CONT Adjustment: Press "0" but-
ton on the service remote control unit six times to
show "BS2" on the display.
C. Angle Adjustment: Press "0" button on the ser-
vice remote control unit seven times to show "C-
ANG" on the display.
3. Y DL Time TV Adjustment: Select "2" by pressing
"CH o / p" buttons on the service remote control.
Y DL Time EXT Adjustment: Select "2" by press-
ing "CH o / p" buttons on the service remote con-
trol.
Y SW LPF Adjustment: Select "0" by pressing
"CH o / p" buttons on the service remote control.
Black Stretch Off Adjustment: Select "OFF" by
pressing "CH o / p" buttons on the service remote
control.
Black Stretch CONT Adjustment: Select "0" by
pressing "CH o / p" buttons on the service remote
control.
C. Angle Adjustment: Select "103" by pressing
"CH o / p" buttons on the service remote control.
C-TRAP Adjustment (Factory mode)
"0"
button
C-TRP 0
"0" button
Y DL Time TV Adjustment
D-T TV 0
"0" button
Y DL Time EXT Adjustment
D-T EXT 0
"0" button
Y SW LPF Adjustment
Y SW
"0" button
Black Stretch Off Adjustment
B-S OFF
"0" button
Black Stretch CONT Adjustment
BS2 0
"0" button
C. Angle Adjustment
C-ANG 103
1-6-3
CH
button
C-TRP 1
CH
button
CH
button
D-T TV 1
CH
button
CH
button
D-T EXT 1
CH
button
CH
button
0 Y SW 1
CH
button
CH
button
B-S 0
CH
button
CH
button
BS2 1
CH
button
CH
button
C-ANG 95
CH
button
T0006EA
Fig. 3