End Program (Cc_Resu_End.spf) - Siemens sinumerik 840D sl Function Manual

Detailed description
2.4 RESU-specific part programs
Caution
In changing the content of the RESU-specific subroutine CC_RESU_INI.SPF, the user
(machine manufacturer) accepts responsibility for the correct sequence of the technological
function.
2.4.3

END program (CC_RESU_END.SPF)

The task of the RESU-specific subroutine CC_RESU_END.SPF is to stop reverse travel
once the end of the retraceable contour is reached. If the RESU function is parameterized
appropriately, this scenario will not arise under normal circumstances.
CC_RESU_END.SPF has the following content by default:
PROC CC_RESU_END
M17
Note
CC_RESU_END.SPF may be changed.
CC_RESU_END.SPF must not contain any RESU part program CC_PREPRE(x) commands.
Caution
In changing the content of the RESU-specific subroutine CC_RESU_END.SPF, the user
(machine manufacturer) accepts responsibility for the correct sequence of the technological
function.
24
M0
Special functions: Retrace Support (TE7)
Function Manual, 11/2006, 6FC5397-2BP10-2BA0